ANALISIS PENGENDALIAN KUALITAS UNTUK MENGURANGI DEFECT PADA GLASS BOTTLE DENGAN MENGGUNAKAN METODE QUALITY CONTROL CIRCLE PT MULIAGLASS CONTAINER DIVISION CIKARANG JAWA BARAT
DOI:
https://doi.org/10.34127/jrlab.v13i2.1151Keywords:
Quality Control, Checker, Defect, Glass Bottle, Quality Control Circle, Stratistical Quality Control, Acceptable Quality LabelAbstract
PT Muliaglass Container Division is a subsidiary of PT Mulia Industrindo, Tbk which is engaged in the glass industry by producing flat glass, glass block, glass packaging, and automotive safety glass as a result of its production. PT Muliaglass Container Division was founded in 1989. The quality control carried out by PT Muliaglass Container Division experienced problems in the Quality Control section or checking checkers, resulting in the defect pass rate so far exceeding the tolerance limits set by the company. There are several types of product defects in glass bottle packaging at PT Muliaglass Container Division, namely Check Ring, Check Under Ring, Leaner, Hot Mold Check, and others. To overcome the problems encountered, research is needed using the Quality Control Circle Method and Statistical Quality Control which are used to calculate how big the reasonable limit is in the product pass rate. After processing Statistical Quality Control data and knowing the number of acceptable quality labels for passing controlled defects or not, proceed with the Quality Control Circle Method, to find out what causes product defects to pass.
References
Abdu Syobir, Hilmi Aulawi. (2016). Identifikasi Penyebab Kecacatan Pada Proses Pembuatan Alas Sandal Di. PT Mandala Logam. Jurnal Kalibrasi Vol. 14 No. 1.
Abdussamad, Zuchri. (2021). Metode Penelitian Kualitatif. Makassar : CV. Syakir Media Press.
Application Of Quality Control Circle Activity In Improving Effectiveness Of Drug Intervention In Lung Cancer Patients With Moderate To Severe Pain. Current Medical Science, 41(5), 996- 1003.
Assuari, Sofyan. (2015). Manajemen Operasi. Jakarta : Rajawali Pers.
Aziz, Abdul. (2019). Total Quality Management: Tahapan Implementasi Tqm Dan Gugus Kendali Mutu. Jawa Timur : Darmajaya Press.
Edi Supriyadi. (2018) Analisis Pengendalian Kualitas Produk Dengan Statistical Proses Control (SPC) Di PT. Surya Toto Indonesia, Tbk. JITMI Vol.1 No. 1 Maret.
Gu, M., Hua, X. L., Li, S. J., Luo, J., Liu, J. M., Zhang, Y., & Shi, C. (2021).
Hafni Sahir, Syafrida. (2021). Metodologi Penelitian. Yogyakarta : CV. KBM Indonesia.
Ibrahim, Tatang Dan Rusdiana. (2021). Manajemen Mutu Terpadu. Bandung : Yrama Widya.
Indrasari, Meithiana.(2019). Pemasaran Dan Kepuasan Pelanggan. Jawa Timur : Unitomo Press.
Julianti, Sri. (2014) The Art Of Packaging : Mengenal Metode, Teknik, & Strategi. Jakarta : PT Gramedia Pustaka Utama.
Kho, B. (2017, 07 03). PENGERTIAN, TUJUAN, MANFAAT, JENIS-JENIS DAN METODE INSPEKSI (INSPECTION). (ILMU MANAJEMEN INDUSTRI) dari https://ilmumanajemenindustri.com/pengertian-inspeksi- inspection-dalam-pengendalian-kualitas/
Muhammad Fikri Baisalim, Dwi Soediantono.(2022). Literature Review Of Quality Control Circle (QCC) And Implementation Recommendation To The Defense Industries. Journal Of Industrial Engineering & Management Research Vol.3 No.2.
Munjiati, M. (2015). Manajemen Operasi. Yogyakarta: LP3M.
Ong Andre Wahyu Riyanto. (2015). Implementasi Metode Quality Control Circle Untuk Menurunkan Tingkat Cacat Pada Produk Alloy Wheel. Jemis Vol. 3 No. 2.
Paramitha, Ratna. Dkk. (2021) Metodologi Penelitian Kuantitatif. Jawa Timur : Widya Gama.
Rony, Utama. Dkk. (2019). Manajemen Operasi. Tangerang Selatan: UM Jakarta Press.
Rusdiana. (2015). Manajemen Operasi. Bandung : CV Pustaka Setia. Bandung Sakti, Joice. (2016). Perubahan Tiada Henti 25 Tahun Perjalanan Qcc Toyota Indonesia. Jakarta: Buku Kompas.
Sugiyono. (2021). Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung : Alfabeta, CV.
Suranto. Manajemen Mutu Dalam Pendidikan. (2019). Semarang: Ghyyas Putra, CV.
Tannady, Hendy. (2015). Pengendalian Kualitas. Yogyakarta: Graha Ilmu.
Yamit, Zulian. (2018). Manajemen Kualitas Produk & Jasa. EKONISIA. Yogyakarta.
Yusuf M. Dkk. (2020). Minimasi Penurunan Defect Pada Produk Meble Berbasis Prolypropylene Untuk Meningkatkan Kualitas. Jurnal Ekobisman Vol. 4 No. 3:244
Downloads
Published
Issue
Section
License
Jurnal Lentera Bisnis disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.
Berdasarkan ciptaan pada https://plj.ac.id/ojs/index.php/jrlab
